Skip to main content

Shower care

Mould on shower silicone: can you clean it, or must it be replaced?

By Clear Conditions Canada
Published

You can often clean it, if the mould sits on the surface. If black spots remain after a proper cleaning, the mould is inside or under the silicone. No cleaner will reach it then, so the silicone needs to be replaced.

What this guide covers

This guide is about mould on shower silicone, caulking and grout. It is not about mould on walls, ceilings, basements or other parts of the home.

We treat mould on shower silicone and grout as part of a shower restoration.

Why mould grows on shower silicone

A shower gives mould what it needs: moisture, warmth and food. The food is soap scum, shampoo and body oils. Silicone is soft, so mould can grow into it over time.

On clear silicone, you can see mould growing underneath, not just on top.

How to clean mould off silicone in the shower

  1. Open a window or run the fan, and wear rubber gloves.
  2. Spray a bathroom mould cleaner onto the silicone. Follow the label.
  3. Leave it for the time the label gives, then scrub gently with an old toothbrush.
  4. Rinse well and dry the silicone with a towel.

For stubborn spots, press a paper towel soaked in the cleaner onto the silicone. Leave it as the label allows. If the spots do not fade after two good cleanings, the mould is inside the silicone.

Safety first: never mix bleach with vinegar, ammonia or other cleaners. The fumes can be dangerous.

Mould in the shower under the silicone

Sometimes the spots sit behind the silicone, not on it. This happens when the seal lifts and water gets behind it. You may see dark patches through clear silicone, or edges that peel away.

Cleaning cannot reach this mould. The silicone has to come out, and the joint must be cleaned and dried. Sealing new silicone over mould traps it, and it comes back.

Clean or replace: a quick check

Clean it if:

  • the spots sit on the surface;
  • they fade or disappear when you clean them.

Replace it if:

  • the spots stay after two good cleanings;
  • you can see mould under clear silicone;
  • the silicone is cracked, peeling or lifting.

Is mould in the shower bad for you?

A few spots on shower silicone are very common. For most people, they are a cleaning job, not an emergency. Mould can still irritate the nose, throat and lungs. People with asthma, allergies or a weak immune system should take more care.

If you have health concerns, ask your doctor. If mould covers a large area or keeps returning on walls and ceilings, have the cause checked.

How to keep mould off your shower silicone

  • Run the bathroom fan while you shower and for a while after.
  • Wipe or squeegee the walls and silicone after showering.
  • Leave the shower door or curtain open so it can dry.
  • Clean soap scum off the silicone regularly.
  • Fix gaps in the silicone early, before water gets behind it.

When to call a professional

Replacing silicone is a job many people can do themselves. Call for help if the mould keeps returning, sits behind the silicone, or has spread into the grout. Our shower restoration in Toronto removes the old silicone, treats the mould on it and recaulks the shower.

If the grout has darkened too, see our Tile & Grout Cleaning service. We work in homes across the GTA, including Toronto, North York and Whitby.

Send us photos of your shower for a free quote

Frequently Asked Questions

For most people, small spots are a cleaning job, not a health emergency. People with asthma or allergies should take more care. If mould covers a large area or keeps coming back beyond the shower, have the cause checked.

Vinegar can help with light surface mould and soap scum. It is weaker than a bathroom mould cleaner. Never mix it with bleach.

Yes, if the joint was not fully cleaned and dried first. Sealing over mould traps it. Remove the old silicone, clean and dry the joint, then recaulk.

It can slow mould down, but it does not stop it. Ventilation and regular cleaning still matter most.

The Focus Is Finally Clear.

Ready for a spotless result?