Skip to main content

Shower care

How often should you recaulk a shower? Signs it is time

By Clear Conditions Canada
Published

There is no fixed schedule. Recaulk when the silicone shows wear: cracks, gaps, peeling edges or mould that will not clean off. Check the silicone once or twice a year, so you catch problems early.

Signs it is time to recaulk your shower

  • Cracks or gaps between the silicone and the tub, tray or tile.
  • Edges that peel or lift when you press them.
  • Black or pink spots that stay after cleaning.
  • Silicone that has turned yellow, hard or crumbly.
  • Water on the floor outside the shower, or stains on the ceiling below.

One of these signs is enough. Old silicone does not get better with time.

Why does my shower caulk keep cracking?

  • The wrong product. Acrylic or latex caulk is less flexible and less water-resistant than silicone.
  • New caulk over old caulk. Fresh silicone does not bond well to old silicone or soap film.
  • A bathtub that moves. A tub sinks slightly when it fills with water and a person.
  • A bead that is too thin. A very thin line has little room to stretch.
  • Harsh cleaners. Strong chemicals can wear silicone down faster.

Why does caulk in the shower keep getting mouldy?

Mould feeds on soap scum and body oils. It also needs moisture. Silicone stays damp in a shower that never dries out. Once mould grows into or under the silicone, no cleaner can reach it. That is why it seems to come back.

Caulk or grout: which goes where?

Grout fills the joints between tiles on a flat wall or floor. It is rigid. Silicone goes where two surfaces meet and can move. That means inside corners, where tile meets the tub or tray, around taps and along glass.

Grout in those places is a common reason for cracks.

How to recaulk a shower yourself

Recaulking is a job many homeowners can do. Take your time with the preparation.

  1. Cut the old silicone away with a utility knife or a plastic scraper.
  2. Remove every bit of residue. A silicone remover helps with the thin film left behind.
  3. Clean the joint with rubbing alcohol and let it dry completely.
  4. For a bathtub, fill it with water first. The joint is then at its widest.
  5. Put masking tape along both sides of the joint for a clean line.
  6. Run a steady bead of 100% silicone made for kitchens and baths, then smooth it.
  7. Pull the tape off right away, before the silicone starts to skin over.

Most of the work is in the removal. If old silicone or mould is left behind, the new bead fails sooner.

How long does it take to recaulk a shower?

For most people, removing the old silicone takes the longest. Applying the new bead is quick once the joint is clean and dry. After that, the silicone needs time to cure before it gets wet.

How long after caulking a shower can I use it?

Follow the cure time printed on the tube. It varies from product to product. Water too soon can weaken the seal or leave marks in it. If you are not sure, wait longer rather than shorter.

When to call a professional

Consider help if the old silicone is hard to remove, or mould has spread behind it. Help also makes sense if you have recaulked before and it failed quickly. Our shower restoration in Toronto includes silicone recaulking. We cut out the old silicone, treat the mould and apply fresh silicone.

We work in homes across the GTA, including Toronto, North York and Markham.

Send us photos of your shower for a free quote

Frequently Asked Questions

The same rule applies as for a shower. Recaulk when the silicone cracks, peels or stays mouldy after cleaning. Check it once or twice a year.

It is not a good idea. New silicone does not bond well to old silicone. Remove the old bead fully first.

Use 100% silicone made for kitchens and baths. It stays flexible and handles water better than acrylic caulk.

Usually the joint was not fully clean, the bead was too thin, or the tub moved. Using the shower before the silicone cured can also cause it.

The Focus Is Finally Clear.

Ready for a spotless result?